G240B-N

$369.00

Each

Quick Ship 45 in stock?These products are in stock and qualify for Same-Day Shipping. Order by 2pm (M-F), and we will ship your order out the same day. Expedited shipping options like Next Day Air are also available. Upgrade shipping at checkout for the fastest delivery option.

Globe Valve (H), 1 1/2", 2-way, ANSI Class 250, Cv 28

45 in stock

or sign up for a free membership to get our lowest pricing.

Weight 5.7 lbs
Brand

Belimo

Flow characteristic
modified equal percentage
Leakage rate
ANSI Class VI
Housing
bronze
Seat
bronze
Body Pressure Rating
ANSI Class 250, up to 400 psi below 150°F
Pipe connection
NPT female ends
Valve Size
1.5" [40]
Pricing Variant
G240B-N
Pressure independent
NO
Product family
Globe Valve
Flow Pattern
2-way
Valve Body Series
G2..
Non-Spring
LVB(X)
Spring
NF
Controllable flow range
stem up - open A – AB
ANSI Class
250
Cv
28 
Maximum Inlet Pressure (Steam)
35 psi [241 kPa]
Max Differential Pressure (Steam)
20 psi [103 kPa]
Closing element
brass
Rangeability Sv
100:1
Stem
stainless steel
Stem seal
EPDM O-ring
Electronic fail-safe
LVKB(X)
Synonyms
G240BN, G240B N, G240 B N
Valve Trim
Bronze
Flow Characteristic Type
equal percentage
Unit of Measure
PC
DN
1 1/2"
Pipe connection type
internal thread
Body pressure rating note
up to 400 psi below 150°F
Media Temp Range (water)
20...280°F [-7...138°C]
cv range [gpm]
17...47
kvs range [m³/h]
15...40
Application
This valve is typically used in air handling units on heating or cooling coils, and fan coil unit heating or cooling coils. Some other common applications include unit ventilators, VAV box re-heat coils and bypass loops. This valve is suitable for use in hydronic systems with variable flow. Bronze and stainless steel trim valves can be used for steam applications, depending on actuator and close-off combinations.
Piping
The valves should be mounted in a weather-protected area in a location that is within the ambient limits of the actuator. Allow sufficient room for valve with actuator and for service. The G2 and G3 preferred mounting position of the valve is with the valve stem vertical above the valve body, for maximum life. However, the assemblies can be mounted with the valve stem vertical or horizontal in relation to the pipe. The actuators should never be mounted underneath the valve, as condensation can build up and result in a failure of the actuators.
CP65 Warning
⚠ WARNING: For Belimo Products sold in California, these Products do or may contain chemicals which are known to the State of California to cause cancer and or birth defects or other reproductive harms. For more information see www.p65warnings.ca.gov.

Need Help?

Call one of our experts 1-888-423-2525

Monday-Friday EST 6:00am - 4:00pm