- Accuracy temperature passive
- passive sensors depending on used type Pt.. = ±0.5°F @ 32°F [±0.3°C @ 0°C] Ni.. = ±0.7°F @ 32°F [±0.4°C @ 0°C] NTC.. = ±0.3°F @ 77°F [±0.2°C @ 25°C]
- Cable gland
- PA6, black
- Medium temperature
- -30...195°F [-35...90°C]
- Ambient temperature
- -30...120°F [-35...50°C]
- Output signal passive temperature
- Pt100|Pt1000|Ni1000 (JCI)|NTC10k2|NTC10k3|NTC20k
- Application text
- Surface contact mounted pipe temperature sensor. Nema 4X / IP65 rated enclosure. Spring loaded brass contact sensor to ensure fast response and accurate reading. [Pipe clamp included.]
- Measuring values
- temperature
- Sensor type
- temperature
- Housing type
- Surface
- Application
- Pipe
- Sensor powertype
- passive
- Cable entry
- Cable gland with strain relief Ø6...8 mm (1/2" NPT conduit adapter included)
- Electrical connection
- Removable spring loaded terminal block max. 2.5 mm²
- Ambient humidity
- max. 95% r.H. non-condensing
- Scope of delivery
- 1/2" NPT conduit adapter
- Mounting instruction
- 01HT, 22HT US Mounting Instruction Sheet
- Degree of protection IEC/EN
- IP65
- Degree of protection NEMA/UL
- NEMA 4X
- Degree of Protection
- IP65, NEMA 4X
- Certification IEC/EN
- IEC/EN 60730-1
- Certification UL
- cULus acc. to UL60730-1A/-2-9, CAN/CSA E60730-1:02/-2-9
- Protection class IEC/EN
- III safety extra-low voltage (selv)
- Protection class UL
- UL Class 2 Supply
- Quality Standard
- ISO 9001
- Material short text
- Contact Temp Sensor PT10k
- Output signal
- NTC10k2
- Housing
- cover: lexan, orange|base: lexan, orange|seal: 0467 NBR70, black
- Optional accessories
- A-22P-A40|A-22P-A42
- Electrical connection note
- Removable spring loaded terminal block max. 2.5 mm²
- Connection
- terminals
- Product family
- Sensor
- CAD data 3D
- Belimo_01HT-1L_3D.dwg|Belimo_01HT-1L_3D.dxf|Belimo_01HT-1L_3D.igs|Belimo_01HT-1L_3D.sat|Belimo_01HT-1L_3D.stp
- Mounting type pipe
- Strap-on
- Housing surface temperature
- max. 195°F [90°C]
- General caution
- The installation and assembly of electrical equipment should only be performed by authorized personnel. This device has been designed for use in stationary heating, ventilation and air conditioning systems and must not be used outside the specified field of application. Unauthorised modifications are prohibited. The product must not be used in relation with any equipment that in case of a failure may threaten human, animals or assets. Ensure all power is disconnected before installing. Do not connect to live/operating equipment.
- Additional caution
- Please comply with • Local laws, health & safety regulations, technical standards and regulations • Condition of the device at the time of installation, to ensure safe installation • This data sheet and installation manual
Datasheet Download: Datasheet
Installation instructions Download: Installation instructions
Need Help?
Call one of our experts 1-888-423-2525
Monday-Friday EST 6:00am - 4:00pm