01HT-5E

$32.85

Each
Contact Temperature Sensor passive, Ni1000 (JCI)

or sign up for a free membership to get our lowest pricing.

Weight 0.33 lbs
Application

Pipe

Brand

Belimo

Sensor type

temperature

Output signal

Ni1000 (JCI)

Accuracy temperature passive
passive sensors depending on used type Pt.. = ±0.5°F @ 32°F [±0.3°C @ 0°C] Ni.. = ±0.7°F @ 32°F [±0.4°C @ 0°C] NTC.. = ±0.3°F @ 77°F [±0.2°C @ 25°C]
Cable gland
PA6, black
Medium temperature
-30...195°F [-35...90°C]
Ambient temperature
-30...120°F [-35...50°C]
Output signal passive temperature
Pt100|Pt1000|Ni1000 (JCI)|NTC10k2|NTC10k3|NTC20k
Application text
Surface contact mounted pipe temperature sensor. Nema 4X / IP65 rated enclosure. Spring loaded brass contact sensor to ensure fast response and accurate reading. [Pipe clamp included.]
Measuring values
temperature
Sensor type
temperature
Housing type
Surface
Application
Pipe
Sensor powertype
passive
Cable entry
Cable gland with strain relief Ø6...8 mm (1/2" NPT conduit adapter included)
Electrical connection
Removable spring loaded terminal block max. 2.5 mm²
Ambient humidity
max. 95% r.H. non-condensing
Scope of delivery
1/2" NPT conduit adapter
Mounting instruction
01HT, 22HT US Mounting Instruction Sheet
Degree of protection IEC/EN
IP65
Degree of protection NEMA/UL
NEMA 4X
Degree of Protection
IP65, NEMA 4X
Certification IEC/EN
IEC/EN 60730-1
Certification UL
cULus acc. to UL60730-1A/-2-9, CAN/CSA E60730-1:02/-2-9
Protection class IEC/EN
III safety extra-low voltage (selv)
Protection class UL
UL Class 2 Supply
Quality Standard
ISO 9001
Material short text
Contact Temp Sensor Ni891
Output signal
Ni1000 (JCI)
Housing
cover: lexan, orange|base: lexan, orange|seal: 0467 NBR70, black
Optional accessories
A-22P-A40|A-22P-A42
Electrical connection note
Removable spring loaded terminal block max. 2.5 mm²
Connection
terminals
Product family
Sensor
CAD data 3D
Belimo_01HT-5.._3D.stp
Mounting type pipe
Strap-on
Housing surface temperature
max. 195°F [90°C]
General caution
The installation and assembly of electrical equipment should only be performed by authorized personnel. This device has been designed for use in stationary heating, ventilation and air conditioning systems and must not be used outside the specified field of application. Unauthorised modifications are prohibited. The product must not be used in relation with any equipment that in case of a failure may threaten human, animals or assets. Ensure all power is disconnected before installing. Do not connect to live/operating equipment.
Additional caution
Please comply with • Local laws, health & safety regulations, technical standards and regulations • Condition of the device at the time of installation, to ensure safe installation • This data sheet and installation manual

Installation instructions Download: Installation instructions

Need Help?

Call one of our experts 1-888-423-2525

Monday-Friday EST 6:00am - 4:00pm