- Maintenance
- maintenance free
- Torque
- 18 in-lb
- Torque motor
- 18 in-lb [2 Nm]
- Power consumption in operation
- 2 W, 3 VA
- Power consumption in rest position
- 1.5 W, 2 VA
- Transformer sizing
- 5 VA (class 2 power source)
- Ambient humidity
- 5...95% r.H. non-condensing
- Housing material
- UL94-5VA
- Electrical Connection
- (2) 18 GA appliance cables with 1/2" conduit connectors, 3 ft [1 m],
- Auxiliary switch
- 2 x SPST, 3A resistive (0.5A inductive) @ 250 VAC, one set at 10°, one set at 80°
- Switching capacity auxiliary switch
- 3A resistive (0.5A inductive) @ 250 VAC
- Auxiliary switch note
- one set at 10°, one set at 80°
- Angle of rotation
- 95°
- Noise level, motor
- <45 dB (A)
- Position indication
- visual indicator, 0° to 95° (0° is full spring return position)
- Ambient temperature
- 32...122°F [0...50°C]
- Non-operating temperature
- -40...176°F [-40...80°C]
- Control
- On/Off
- direction of rotation spring-return
- reversible with cw/ccw mounting
- Overload Protection
- electronic throughout 0° to 95° rotation
- Electrical Protection
- actuators are double insulated
- Quality Standard
- ISO 9001
- Degree of Protection
- IP42, NEMA 2, UL Enclosure Type 2
- direction of rotation motor
- reversible with CW/CCW mounting
- Data sheet type
- Ver_AM_Actuator/Accessory
- CAD ThomasNetLink
- FSTF24-S US
- Product Features
- Torque 18 in-lb, 250°F for 30 min, for fire and smoke dampers
- Nominal voltage
- AC/DC 24 V
- Nominal voltage AC
- 24 V
- Nominal voltage DC
- 24 V
- Nominal voltage frequency
- 50/60 Hz
- Power Supply
- 24 VAC, ±20%, 50/60 Hz, 24 VDC, -10% / +20%
- Power supply tolerance AC
- ±20%
- Power supply tolerance DC
- -10% / +20%
- Mechanical accessories
- KH-TF US|KH-TF-1 US|KH-TF-1.1 US|TF-P|TOOL-06|ZDB-TF|ZG-TF2|ZG-TF3|ZG-TF112|ZS-100|ZS-150
- Electrical accessories
- BAE165 US
- Family Series
- FSTF Series
- Shaft Diameter
- 1/4" to 1/2" round, centers on 1/2"
- Synonyms
- FSTF24SUS, FSTF24-SUS, FSTF24-S, FSTF24S, Belimo FSTF24-S US
- Running time selection
- 50...79 sec
- Running Time (Motor)
- <75 sec @ 250°F [121°C]
- Running time motor note
- @ 250°F [121°C]
- Running time (Fail-Safe)
- <25 seconds
- Running Time (Fail-Safe)
- <25 sec @ 32...122°F [0...50°C]
- Running time (Fail-Safe) note
- @ 32...122°F [0...50°C]
- Emergency control function
- Spring Return
- Noise Level (Fail-Safe)
- <62 dB (A)
- Degree of protection IEC/EN
- IP42
- Degree of protection NEMA/UL
- NEMA 2
- Enclosure
- UL Enclosure Type 2
- Not purchasable function
- AP_IN
- Tagging function
- AP_AU|AP_CN|AP_HK
- Auxiliary Switch
- 2 SPST
- Application
- The type FSTF spring-return actuator is intended for the operation of smoke and combination fire and smoke dampers in ventilation and air-conditioning systems. The actuator will meet requirements of UL555 and UL555S when tested as an assembly with the damper. Square footage of damper operated will depend on make and model per damper manufacturer UL testing.
- Operation
- Mounting of the actuator to the damper axle shaft or jackshaft is via a cold-weld clamp. Teeth in the clamp and V-bolt dig into the metal of both solid and hollow shafts maintaining a perfect connection. The specially designed clamp will not crush hollow shafts. The bottom end of the actuator is held by an anti-rotation strap or by a stud provided by the damper manufacturer. The actuator is mounted in its fail safe position with the damper blade(s) typically closed. Upon applying power, the actuator drives the damper to the open position. The internal spring is tensioned at the same time. If the power supply is interrupted, the spring moves the damper back to its fail-safe position.
- Typical Specification
- All smoke and combination fire and smoke dampers shall be provided with Belimo FSTF, FSLF, FSNF, or FSAF actuators. All substitutions must be approved before submission of bid. Damper and actuator shall have UL 555S Listing for 250°F &/or 350°F. Actuator shall have been tested to UL 2043 per requirements of IMC 602.2 and NEC 300.22 (c). Where position indication is required -S models with auxiliary switches or damper blade switches will be provided per code requirements.
- Agency Listing
- cULus acc. to UL60730-1A/-2-14, CAN/CSA E60730-1:02, Listed to UL 2043 - suitable for use in air plenums per Section 300.22(C) of the NEC and Section 602 of the IMC. California State Fire Marshal Listing 3210-1593:104
- Safety Notes
- Screw a conduit fitting into the actuator’s bushing. Jacket the actuator’s input and output wiring with suitable flexible conduit. Properly terminate the conduit in a suitable junction box. Retrofit Safety Note Use of the FSTF for replacement of other makes of actuators is limited in damper area. The FSLF is preferred for direct coupled applications. The FSTF may be applied for linkage applications on dampers 1.5 sq.ft. and smaller at velocities under 2000 fpm.
- CP65 Warning
- ⚠ WARNING: For Belimo Products sold in California, these Products do or may contain chemicals which are known to the State of California to cause cancer and or birth defects or other reproductive harms. For more information see www.p65warnings.ca.gov.
Datasheet Download: Datasheet
Need Help?
Call one of our experts 1-888-423-2525
Monday-Friday EST 6:00am - 4:00pm
