SY6-230MFT
This product is no longer available. Please see our other products in this category or contact us for more info.
Valve Actuator,Non-Spring,230V,MFT,SW,NEMA 4H
Weight | 49 lbs |
---|---|
Actuator Type | Non fail-safe |
Brand | Belimo |
Control type | MFT/Programmable |
Torque | 5785 in-lb |
- Maintenance
- maintenance free
- Torque
- 5785 in-lb
- Torque motor
- 5785 in-lb [650 Nm]
- Transformer sizing
- 230 VA
- Ambient humidity
- 5...95% r.H. non-condensing
- Housing material
- die cast aluminum alloy
- Electrical Connection
- Terminal blocks
- Auxiliary switch
- 2 x SPDT, 3A resistive (0.5A inductive) @ 250 VAC, one set at 10°, one set at 85°
- Manual override
- hand wheel
- Angle of rotation
- 90°
- Noise level, motor
- <45 dB (A)
- Position indication
- top mounted domed indicator
- Ambient temperature
- -22...150°F [-30...65°C]
- Non-operating temperature
- -40...176°F [-40...80°C]
- Control
- MFT/programmable
- direction of rotation motor
- reversible with built-in switch
- Overload Protection
- thermally protected 135°C cut-out
- Input Impedance
- 100 kΩ
- Quality Standard
- ISO 9001
- Degree of Protection
- IP66/67, NEMA 4X, UL Enclosure Type 4X
- Nominal voltage
- AC 230 V
- Power Supply
- 230 VAC, ±10%, 50/60 Hz
- Agency Listing
- ISO, CE, cCSAus
- Position Feedback
- DC 2...10 V
- Operating Range
- DC 2...10 V (default), ,
- Emergency control function
- Non-Spring Return
- Family Series
- SY Series
- Operating range Y
- DC 2...10 V
- Position feedback U
- DC 2...10 V
- Running Time (Motor)
- 35 sec
- Fail-Safe function
- Non fail-safe
- Control type
- MFT/Programmable
- Connection
- terminals
- Degree of protection IEC/EN
- IP66/67
- Degree of protection NEMA/UL
- NEMA 4X
- Enclosure
- UL Enclosure Type 4X
- Auxiliary Switch
- 2 SPDT
- Tagging function
- US|CA
- Application
- SY Series actuators are fractional horsepower devices, and utilize full-wave power supplies. Observe wire sizing and transformer sizing requirements. Proportional models CANNOT be connected to Belimo direct coupled (AF, AM, GM…etc) actuator power supplies or any type of half-wave device. You MUST use a separate, dedicated transformer or power supply to power the SY actuator. Please do not connect other automation equipment to the dedicated SY supply source. You MUST use four wires (plus a ground) to control a proportional control SY actuator (See SY Wiring Section).
- CP65 Warning
- ⚠ WARNING: For Belimo Products sold in California, these Products do or may contain chemicals which are known to the State of California to cause cancer and or birth defects or other reproductive harms. For more information see www.p65warnings.ca.gov.
Datasheet Download: Datasheet
Need Help?
Call one of our experts 1-888-423-2525
Monday-Friday EST 6:00am - 4:00pm