NFX24-S N4

$431.48

Each
Configurable Damper Actuator, 90 in-lb [10 Nm], Spring return, AC/DC 24 V, On/Off, 2 x SPDT, NEMA 4X
Fail-safe position
Weight 6.0 lbs
Torque

90 in-lb [10 Nm]

Voltage

AC/DC 24 V

Auxiliary Switch

2 SPDT

Actuator Type

Spring return

Control type

On/Off

Brand

Torque motor
90 in-lb [10 Nm]
Power consumption in operation
6 W
Power consumption in rest position
2.5 W
Transformer sizing
8.5 VA (class 2 power source)
Ambient humidity
5...95% r.H. non-condensing
Housing material
polycarbonate
Electrical Connection
(2) 18 GA appliance cables, 3 ft [1 m], 10 ft [3 m] or 16ft [5 m], with 1/2" conduit connectors
Auxiliary switch
2 x SPDT, 3A resistive (0.5A inductive) @ 250 VAC, one set at 10°, one adjustable 10...90°
Manual override
5 mm hex crank (3/16" Allen), supplied
Angle of rotation
95°, adjustable with mechanical end stop, 35...95°
Position indication
dial
Ambient temperature
-22...122°F [-30...50°C]
Non-operating temperature
-40...176°F [-40...80°C]
Control
On/Off
direction of rotation motor
reversible with CW/CCW mounting
Overload Protection
electronic throughout 0° to 95° rotation
Degree of Protection
IP66, NEMA 4X, UL Enclosure Type 4X
Nominal voltage
AC/DC 24 V
Nominal voltage frequency
50/60 Hz
Power Supply
24 VAC, ±20%, 50/60 Hz, 24 VDC, -10% / +20%
Power supply tolerance AC
±20%
Power supply tolerance DC
-10% / +20%
Agency Listing
cULus acc. to UL60730-1A/-2-14, CAN/CSA E60730-1:02, CE acc. to 2004/108/EC and 2006/95/EC
Emergency control function
Spring Return
Product family
Damper Actuator
direction of rotation spring-return
reversible with cw/ccw mounting
Noise level, motor
≤50 dB (A) 
Shaft Diameter
1/2" to 1.05" round, centers on 3/4" with insert, 1.05" without insert
Electrical accessories
11097-00001|43442-00001|P475|P475-1|PS-100|ZG-X40
Mechanical accessories
AF-P|KG10A|KH10|SH10|TOOL-06|TOOL-07|ZG-DC1|ZG-DC2|ZG-JSA-1|ZG-JSA-2|ZG-JSA-3
Family Series
NF Series
Noise Level (Fail-Safe)
<62 dB (A) 
Running time (Fail-Safe)
20 seconds
Running Time (Motor)
<75 sec
Running Time (Fail-Safe)
<20 sec @ -4...122°F [-20...50°C], <60 sec @ -22°F [-30°C]
Fail-Safe function
Spring return
Control type
On/Off
Connection
cable
Degree of protection IEC/EN
IP66
Degree of protection NEMA/UL
NEMA 4X
Enclosure
UL Enclosure Type 4X
Auxiliary Switch
2 SPDT
CAD ThomasNetLink
NFX24-S N4
Product Features
Torque min. 90 in-lb, for control of air dampers.
Electrical Protection
actuators are double insulated
Operation
The NF..24-S N4 series actuators provide true spring return operation for reliable fail-safe application and positive close off on air tight dampers. The spring return system provides constant torque to the damper with, and without, power applied to the actuator. The NF..24-S N4 series provides 95° of rotation and is provided with a graduated position indicator showing 0° to 95°. The actuator may be stalled anywhere in its normal rotation without the need of mechanical end switches. The NF..24-S N4 version are provided with two built-in auxiliary switches. These SPDT switches are provided for safety interfacing or signaling, for example, for fan start-up. The switching function at the fail-safe position is fixed at 10°, the other switch function is adjustable between 10° to 90°. The NF..24-S N4 actuator is shipped at 5° (5° from full fail-safe) to provide automatic compression against damper gaskets for tight shut-off.
Application
For On/Off, fail-safe control of dampers in HVAC systems. Actuator sizing should be done in accordance with the damper manufacturer's specifications. Control is On/Off from an auxiliary contact or a manual switch. The actuator is mounted directly to a damper shaft up to 1.05" in diameter by means of its universal clamp.
Typical Specification
On/Off spring return damper actuators shall be direct coupled type which require no crank arm and linkage and be capable of direct mounting to a jackshaft up to a 1.05” diameter. The actuators must be designed so that they may be used for either clockwise or counter clockwise fail-safe operation. Actuators shall be protected from overload at all angles of rotation. If required, two SPDT auxiliary switch shall be provided having the capability of one being adjustable. Actuators with auxiliary switches must be constructed to meet the requirements for Double Insulation so an electrical ground is not required to meet agency listings. Actuators shall be cULus listed and have a 5 year warranty, and be manufactured under ISO 9001 International Quality Control Standards. Actuators shall be as manufactured by Belimo.
CP65 Warning
⚠ WARNING: For Belimo Products sold in California, these Products do or may contain chemicals which are known to the State of California to cause cancer and or birth defects or other reproductive harms. For more information see www.p65warnings.ca.gov.

Installation instructions Download: Installation instructions

Need Help?

Call one of our experts 1-888-423-2525

Monday-Friday EST 6:00am - 4:00pm