AFB24-SR-S N4
This product is no longer available. Please see our other products in this category or contact us for more info.
Damper Actuator, 180 in-lb [20 Nm], Spring return, AC/DC 24 V, DC 2…10 V, 2 x SPDT, NEMA 4X
| Weight | 7.9 lbs |
|---|---|
| Torque | 180 in-lb [20 Nm] |
| Brand | Belimo |
| Voltage | AC/DC 24 V |
| Auxiliary Switch | 2 SPDT |
| Actuator Type | Spring return |
| Control type | Modulating |
- Torque motor
- 180 in-lb [20 Nm]
- Power consumption in operation
- 5.5 W
- Power consumption in rest position
- 3 W
- Transformer sizing
- 8.5 VA (class 2 power source)
- Ambient humidity
- 5...95% r.H. non-condensing
- Housing material
- polycarbonate
- Electrical Connection
- (2) 18 GA appliance cables with 1/2" conduit connectors, 3 ft [1 m],
- Auxiliary switch
- 2 x SPDT, 3A resistive (0.5A inductive) @ 250 VAC, one set at 10°, one adjustable 10...90°
- Manual override
- 5 mm hex crank (3/16" Allen), supplied
- Angle of rotation
- 95°, adjustable with mechanical end stop, 35...95°
- Position indication
- dial
- Ambient temperature
- -22...122°F [-30...50°C]
- Non-operating temperature
- -40...176°F [-40...80°C]
- Control
- Modulating
- Control operating range Y note
- 4...20 mA w/ ZG-R01 (500 Ω, 1/4 W resistor)
- Position Feedback
- DC 2...10 V, Max. 0.5 mA
- direction of rotation motor
- reversible with built-in switch
- Overload Protection
- electronic throughout 0° to 95° rotation
- Input Impedance
- 100 kΩ for DC 2...10 V (0.1 mA), 500 Ω for 4...20 mA
- Degree of Protection
- IP66, NEMA 4X, UL Enclosure Type 4X
- Nominal voltage
- AC/DC 24 V
- Nominal voltage frequency
- 50/60 Hz
- Power Supply
- 24 VAC, ±20%, 50/60 Hz, 24 VDC, -10% / +20%
- Power supply tolerance AC
- ±20%
- Power supply tolerance DC
- -10% / +20%
- Agency Listing
- cULus acc. to UL60730-1A/-2-14, CAN/CSA E60730-1:02, CE acc. to 2004/108/EC and 2006/95/EC
- Operating Range
- DC 2...10 V, 4...20 mA w/ ZG-R01 (500 Ω, 1/4 W resistor)
- Emergency control function
- Spring Return
- Product family
- Damper Actuator
- direction of rotation spring-return
- reversible with cw/ccw mounting
- Noise level, motor
- ≤40 dB (A)
- Shaft Diameter
- 1/2" to 1.05" round, centers on 3/4" with insert, 1.05" without insert
- Electrical accessories
- 11097-00001|43442-00001|ADS-100|IRM-100|P475|P475-1|PS-100|PTA-250|SGA24|SGF24|ZG-R01|ZG-R02|ZG-SGF|ZG-X40
- Mechanical accessories
- AF-P|KG10A|KH10|SH10|TOOL-06|TOOL-07|ZG-DC1|ZG-DC2|ZG-JSA-1|ZG-JSA-2|ZG-JSA-3
- Family Series
- AF Series
- Noise Level (Fail-Safe)
- <62 dB (A)
- Running time (Fail-Safe)
- <20 seconds
- Running Time (Motor)
- 95 sec
- Running Time (Fail-Safe)
- <20 sec @ -4...122°F [-20...50°C], <60 sec @ -22°F [-30°C]
- Fail-Safe function
- Spring return
- Control type
- Modulating
- Connection
- cable
- Degree of protection IEC/EN
- IP66
- Degree of protection NEMA/UL
- NEMA 4X
- Enclosure
- UL Enclosure Type 4X
- Auxiliary Switch
- 2 SPDT
- CAD ThomasNetLink
- AFB24-SR-S N4
- Product Features
- Torque min. 180 in-lb, Control 2 to 10 VDC, Feedback 2 to 10 VDC
- Electrical Protection
- actuators are double insulated
- Operation
- The AF..24-SR-S N4 series actuators provide true spring return operation for reliable fail-safe application and positive close off on air tight dampers. The spring return system provides constant torque to the damper with, and without, power applied to the actuator. The AF..24-SR-S N4 series provides 95° of rotation and is provided with a graduated position indicator showing 0° to 95°. The AF..24-SR-S N4 uses a brushless DC motor which is controlled by an Application Specific Integrated Circuit (ASIC) and a microprocessor. The microprocessor provides the intelligence to the ASIC to provide a constant rotation rate and to know the actuator’s exact fail-safe position. The ASIC monitors and controls the brushless DC motor’s rotation and provides a digital rotation sensing function to prevent damage to the actuator in a stall condition. The actuator may be stalled anywhere in its normal rotation without the need of mechanical end switches. The AF..24-SR-S N4 versions are provided with two built-in auxiliary switches. These SPDT switches provide safety interfacing or signaling, for example, for fan start-up. The switching function at the fail-safe position is fixed at 10°, the other switch function is adjustable between 10° to 90°. The AF..24-SR-S N4 actuator is shipped at 5° (5° from full fail-safe) to provide automatic compression against damper gaskets for tight shut-off. ATTENTION: AF..24-SR-S N4 cannot be tandem mounted on the same damper or valve shaft. Only On/Off and MFT AF.. models can be used for tandem mount applications. Installation Note: Use suitable flexible metallic conduit or its equivalent with the conduit fitting. Not suitable for plenum applications.
- Application
- For modulation of dampers in HVAC systems. Actuator sizing should be done in accordance with the damper manufacturer’s specifications. The actuator is mounted directly to a damper shaft up to 1.05” in diameter by means of its universal clamp. The actuator operates in response to a 2 to 10 VDC, with the addition of a 500Ω resistor, a 4 to 20 mA control input from an electronic controller or positioner. A 2 to 10 VDC feedback signal is provided for position indication. Not to be used for a master-slave application.
- Typical Specification
- Spring return control damper actuators shall be direct coupled type which require no crank arm and linkage and be capable of direct mounting to a jackshaft up to a 1.05” diameter. The actuator must provide modulating damper control in response to a 2 to 10 VDC or, with the addition of a 500Ω resistor, a 4 to 20 mA control input from an electronic controller or positioner. The actuators must be designed so that they may be used for either clockwise or counter clockwise fail-safe operation. Actuators shall use a brushless DC motor controlled by a microprocessor and be protected from overload at all angles of rotation. Run time shall be constant, and independent of torque. A 2 to 10 VDC feedback signal shall be provided for position feedback. Actuators with auxiliary switches must be constructed to meet the requirements for Double Insulation so an electrical ground is not required to meet agency listings. Actuators shall be cULus listed and have a 5 year warranty, and be manufactured under ISO 9001 International Quality Control Standards. Actuators shall be as manufactured by Belimo.
- CP65 Warning
- ⚠ WARNING: For Belimo Products sold in California, these Products do or may contain chemicals which are known to the State of California to cause cancer and or birth defects or other reproductive harms. For more information see www.p65warnings.ca.gov.
Datasheet Download: Datasheet
Installation instructions Download: Installation instructions
Need Help?
Call one of our experts 1-888-423-2525
Monday-Friday EST 6:00am - 4:00pm
