NMX24-LON

This product is no longer available. Please see our other products in this category.

Configurable Damper Actuator, 90 in-lb [10 Nm], Non fail-safe, AC/DC 24 V, modulating, communicative, Hybrid, LON (FTT-10A)
Weight 1.3 lbs
Torque

90 in-lb [10 Nm]

Brand

Belimo

Voltage

AC/DC 24 V

Actuator Type

Non fail-safe

Control type

Communicative, Hybrid, Modulating

Torque motor
90 in-lb [10 Nm]
Power consumption in operation
3.5 W
Power consumption in rest position
1.3 W
Transformer sizing
6 VA (class 2 power source)
Ambient humidity
5...95% r.H. non condensing (EN 60730-1)
Housing material
UL94-5VA
Electrical Connection
18 GA plenum cable with 1/2" conduit connector, degree of protection NEMA 2 / IP54, 3 ft [1 m] 10 ft [3 m] and 16ft [5 m]
Manual override
external push button
Angle of rotation
Max. 95°, adjustable with mechanical stop
Position indication
reflective visual indicator (snap on)
Ambient temperature
-22...122°F [-30...50°C]
Non-operating temperature
-40...176°F [-40...80°C]
Control
Modulating|communicative|Hybrid
Position Feedback
DC 2...10 V, Max. 0.5 mA, VDC variable
direction of rotation motor
reversible with built-in switch
Overload Protection
electronic throughout 0° to 95° rotation
Degree of Protection
IP54, NEMA 2, UL Enclosure Type 2
Nominal voltage
AC/DC 24 V
Nominal voltage frequency
50/60 Hz
Power Supply
24 VAC, ±20%, 50/60 Hz, 24 VDC, ±10%
Power supply tolerance AC
±20%
Power supply tolerance DC
±10%
Agency Listing
cULus acc. to UL60730-1A/-2-14, CAN/CSA E60730-1:02, CE acc. to 2004/108/EC and 2006/95/EC
Emergency control function
Non-Spring Return
Product family
Damper Actuator
Communication
LON (FTT-10A)
Noise level, motor
<45 dB (A) 
Shaft Diameter
1/2" to 1.05" round, centers on 1/2" and 3/4" with insert, 1.05" without insert
Electrical accessories
S1A|S2A|P370|P10000A GR|P1000A GR|P140A GR|P2800A GR|P5000A GR|P500A GR|SGA24|ADS-100|NSV24 US|ZG-X40
Mechanical accessories
K-NA|ZG-100|ZG-101|ZG-103|ZG-104|ZG-NMA|AV8-25|ZG-NMSA-1|ZS-100|ZS-150|TOOL-06
Family Series
NM Series
Running Time (Motor)
default 150 sec, variable 35...150 sec
Fail-Safe function
Non fail-safe
Control type
Communicative
Connection
cable
Degree of protection IEC/EN
IP54
Degree of protection NEMA/UL
NEMA 2
Enclosure
UL Enclosure Type 2
CAD ThomasNetLink
NMX24-LON
Product Features
Torque min. 90 in-lb, for control of damper surfaces up to 22 sq. ft.
Operation
The actuator is not provided with and does not require any limit switches, but is electronically protected against overload. The anti-rotation strap supplied with the actuator will prevent lateral movement. The NMX24-LON series provides 95° of rotation and a visual indicator indicates position of the actuator. When reaching the damper or actuator end position, the actuator automatically stops. The gears can be manually disengaged with a button on the actuator cover. The NMX24-LON actuators use a brushless DC motor, which is controlled by an Application Specific Integrated Circuit (ASIC). The ASIC monitors and controls the actuator’s rotation and provides a digital rotation sensing (DRS) function to prevent damage to the actuator in a stall condition. Power consumption is reduced in holding mode. Add-on auxiliary switches or feedback potentiometers are easily fastened directly onto the actuator body for signaling and switching functions.
Application
Direct coupled actuators for direct link to LonWorks network. Actuators are easily installed by direct shaft mounting on air dampers in ventilation and air conditioning systems. Actuator can be controlled by any compatible LON system. For proportional modulation of dampers in HVAC systems. Actuator sizing should be done in accordance with the damper manufacturer’s specifications. The actuator is mounted directly to a damper shaft up to 1.05” diameter by means of its universal clamp. A crank arm and several mounting brackets are available for applications where the actuator cannot be direct coupled to the damper shaft.
Typical Specification
Proportional control damper actuators shall be electronic direct-coupled type, which require no crank arm and linkage and be capable of direct mounting to a shaft up to 1.05” diameter. Actuators shall have brushless DC motor technology and be protected from overload at all angles of rotation. Actuators shall have reversing switch and manual override on the cover. Run time shall be constant and independent of torque. Actuators shall be cULus listed, have a 5-year warranty, and be manufactured under ISO 9001 International Quality Control Standards. Actuators shall be as manufactured by Belimo.
CP65 Warning
⚠ WARNING: For Belimo Products sold in California, these Products do or may contain chemicals which are known to the State of California to cause cancer and or birth defects or other reproductive harms. For more information see www.p65warnings.ca.gov.

Installation instructions Download: Installation instructions

Need Help?

Call one of our experts 1-888-423-2525

Monday-Friday EST 6:00am - 4:00pm