AMX24-LON

$334.33

Each
Configurable Damper Actuator, 180 in-lb [20 Nm], Non fail-safe, AC/DC 24 V, modulating, communicative, Hybrid, LON (FTT-10A)
Weight 1.5 lbs
Torque

180 in-lb [20 Nm]

Voltage

AC/DC 24 V

Actuator Type

Non fail-safe

Control type

Communicative, Hybrid, Modulating

Brand

Torque motor
180 in-lb [20 Nm]
Power consumption in operation
3.5 W
Power consumption in rest position
1.3 W
Transformer sizing
6 VA (class 2 power source)
Ambient humidity
5...95% r.H. non condensing (EN 60730-1)
Housing material
UL94-5VA
Electrical Connection
18 GA plenum cable with 1/2" conduit connector, degree of protection NEMA 2 / IP54, 3 ft [1 m] 10 ft [3 m] and 16ft [5 m]
Manual override
external push button
Angle of rotation
Max. 95°, adjustable with mechanical stop
Position indication
reflective visual indicator (snap on)
Ambient temperature
-22...122°F [-30...50°C]
Non-operating temperature
-40...176°F [-40...80°C]
Control
Modulating|communicative|Hybrid
direction of rotation motor
reversible with built-in switch
Overload Protection
electronic throughout 0° to 95° rotation
Degree of Protection
IP54, NEMA 2, UL Enclosure Type 2
Nominal voltage
AC/DC 24 V
Nominal voltage frequency
50/60 Hz
Power Supply
24 VAC, ±20%, 50/60 Hz, 24 VDC, ±10%
Power supply tolerance AC
±20%
Power supply tolerance DC
±10%
Agency Listing
cULus acc. to UL60730-1A/-2-14, CAN/CSA E60730-1:02, CE acc. to 2004/108/EC and 2006/95/EC
Emergency control function
Non-Spring Return
Product family
Damper Actuator
Communication
LON (FTT-10A)
Noise level, motor
<45 dB (A) 
Shaft Diameter
1/2" to 1.05" round, centers on 1/2" and 3/4" with insert, 1.05" without insert
Family Series
AM Series
Running Time (Motor)
150 sec
Fail-Safe function
Non fail-safe
Control type
Communicative
Connection
cable
Degree of protection IEC/EN
IP54
Degree of protection NEMA/UL
NEMA 2
Enclosure
UL Enclosure Type 2
CAD ThomasNetLink
AMX24-LON
Product Features
Torque min. 180 in-lb, for control of damper surfaces up to 45 sq. ft.
Typical Specification
Proportional control damper actuators shall be electronic direct-coupled type, which require no crank arm and linkage and be capable of direct mounting to a shaft from 1/4" to 1/2" diameter. Actuators must provide proportional damper control response to a 2 to 10 VDC or, with the addition of a 500Ω resistor, a 4 to 20 mA control input from an electronic controller or positioner. Actuators shall have brushless DC motor technology and be protected from overload at all angles of rotation. Actuators shall have manual override on the cover. Run time shall be constant and independent of torque. Actuators shall be cULus listed, have a 5-year warranty, and be manufactured under ISO 9001 International Quality Control Standards. Actuators shall be as manufactured by Belimo.
CP65 Warning
⚠ WARNING: For Belimo Products sold in California, these Products do or may contain chemicals which are known to the State of California to cause cancer and or birth defects or other reproductive harms. For more information see www.p65warnings.ca.gov.

Installation instructions Download: Installation instructions

Need Help?

Call one of our experts 1-888-423-2525

Monday-Friday EST 6:00am - 4:00pm