P5000A GR
$103.05
EachFeedback potentiometer 5 kΩ add-on, grau
| Weight | 0.40 lbs |
|---|---|
| Brand | Belimo |
- Protection class IEC/EN
- III safety extra-low voltage (selv)
- Protection class UL
- UL Class 2 Supply
- Degree of protection IEC/EN
- IP54
- Degree of Protection
- IP54
- Material short text
- Pot. add. 5000 Ohm FRNC grey
- Introductory text
- Nominal resistance 5 kΩ
- Accessories title
- Feedback potentiometer
- Accessories text
- Feedback potentiometer add-on, grau
- Accessories use
- add-on, grau
- Product family
- Accessory
- NA Product type
- ZE - Accessory electronic
- Structure Level1
- Actuators
- Structure Level2
- Accessories
- Ambient temperature
- -22...122°F [-30...50°C]
- Non-operating temperature
- -40...176°F [-40...80°C]
- Ambient humidity
- max. 95% r.H. non-condensing
- Maintenance
- maintenance free
- Clamping range damper spindle
- DIM_EU_S2A_1.eps
- Connection
- cable
- Rated impulse voltage supply
- 0.8 kV
- Connection Cable
- YES
- Accessory type
- Electrical accessory
- Non-Spring
- 2*GMB(X)|GMB(X)|AMB(X)|NMB(X)|LMB(X)
- Electronic fail-safe
- NKQB(X)
- Agency Listing
- cULus acc. to UL60730-1, CE according to 73/23/EEC
- Mode of operation
- A carrier plate uses adaption to make a positive fit on the spindle clamp (damper actuators) or on the position indication (rotary actuators) and transfers the position directly to the feedback potentiometer.
- Mounting instruction
- https://www.belimo.com/pim/mam/europe/technical-documentation/Installation instruction/70153-00001_S..A_P..A.pdf|https://www.belimo.com/pim/mam/europe/technical-documentation/Installation instruction/71184-00001_Z-SPA.pdf
- Direct mounting
- The feedback potentiometers are attached directly by the spindle clamp (damper actuators) or on the position indication (rotary actuators). The guiding grooves between the housing and the switch ensure a tightly sealing fit.
- Application
- The feedback potentiometer unit is used for modulating damper control in connection with controllers with fixed feedback. The feedback potentiometers can also be used in conjunction with commercially available systems for damper position indication or as positioners for parallel running actuators.
- Safety notes
- The device must not be used outside the specified field of application, especially not in aircraft or in any other airborne means of transport. Only authorised specialists may carry out installation. All applicable legal or institutional installation regulations must be complied during installation. The device may only be opened at the manufacturer's site. It does not contain any parts that can be replaced or repaired by the user. Cables must not be removed from the device. The device contains electrical and electronic components and must not be disposed of as household refuse. All locally valid regulations and requirements must be observed.
Datasheet Download: Datasheet
Installation instructions Download: Installation instructions
Need Help?
Call one of our experts 1-888-423-2525
Monday-Friday EST 6:00am - 4:00pm
